閉口樓承板經實驗證實更具強大的承載力和抗剪力，閉口肋形的特殊設計，讓鋼承板的板肋完全被混凝土裹護，如同現澆板里的鋼筋，從而能夠大限度的發揮各自的特性，成功應用于受力配筋的樓承板系統中，并有非常好的耐火性能。那么你知道閉口樓承板與普通開口板相比安裝技術優勢如何嗎？下面濟南樓承板廠家為您分析：

The closed floor bearing plate has been proved to have stronger bearing capacity and shear resistance by experiments. The special design of the closed rib shape allows the steel bearing plate's rib to be completely covered by concrete, just like the reinforcement in the cast-in-place slab, so that they can give full play to their respective characteristics, and have been successfully applied to the floor bearing plate system with stress reinforcement, and have very good fire resistance performance. Do you know the advantages of installation technology of closed floor bearing plate compared with ordinary open plate? Jinan floor bearing plate manufacturer will analyze for you:

1．閉口樓承板排板時只需按跨距順排，與鋼梁順接時，由于板底平整，有足夠與鋼梁實接面積。因此不用處理可直接鋪過去（開口板因要避免與鋼梁虛搭而需切割補板）。

1. When arranging the bearing plates of the closed floor, it is only necessary to arrange them in sequence according to the span. When connecting with the steel beam in sequence, due to the flat bottom of the plate, there is enough area to connect with the steel beam. Therefore, it can be paved directly without treatment (the opening plate needs to be cut and repaired to avoid false overlap with the steel beam).

2．開口板在端口處應封堵板，以免澆筑混凝土進從板底開口漏漿，而閉口樓承板因腹板閉合而不用端頭堵板。

2. The opening plate shall be blocked at the port to prevent the concrete pouring from leaking from the opening at the bottom of the plate, while the closed floor bearing plate does not need to be blocked at the end due to the closure of the web.

3．閉口樓承板因板底平整，無論與鋼梁橫搭還是順搭，均能與鋼梁上翼板充分結合，因此鋼梁上翼板頂面無需噴防火涂料。而開口型鋼承板與鋼梁之間具有空洞，需做肩塞補滿空洞。

3. Due to the flat bottom of the plate, the bearing plate of the closed floor can be fully combined with the upper flange of the steel beam, regardless of whether it is horizontally or vertically lapped with the steel beam, so the top surface of the upper flange of the steel beam does not need to be sprayed with fireproof paint. However, there is a hole between the open steel bearing plate and the steel beam, so it is necessary to fill the hole with shoulder plugs.

4．閉口樓承板完全替代下層鋼筋，減少現場鋼筋制作量，可減輕現場勞動量，加快施工速度。同時取消原設計下層鋼筋，可為樓板中鋪設電線套管提供更大空間。

4. The closed floor bearing plate can completely replace the lower reinforcement, reduce the amount of on-site reinforcement fabrication, reduce the amount of on-site labor and speed up the construction. At the same time, the original design of the lower reinforcement is canceled, which can provide more space for laying wire sleeves in the floor.

另外由于上述優勢可明顯加快加工速度，縮短工期。因此，采用閉口樓承板一方面可降低工程直接成本，另一方面又可降低工程管道費用。您有怎樣的疑惑就來我們網站http://www.95fjrc.com咨詢吧！

In addition, the above advantages can significantly speed up the processing speed and shorten the construction period. Therefore, the use of closed floor bearing plate can reduce the direct cost of the project on the one hand, and reduce the cost of the project pipeline on the other hand. Come to our website if you have any doubts http://www.95fjrc.com Ask!